VSI6X Series Vertical Crusher

VSI6X Series Vertical Crusher Introduction

VSI6X Series Vertical Crusher is also called sand making machine. SKD keen on research for decades and release the very kind of high efficiency sand making and crushing equipment, which we own fully core intellectual property rights and multiple national patent. It is a full embodiment of new technology and new technology, provide the highest quality sand and gravel aggregate.

Input Size: 0-50mm
Capacity: 100-583TPH
Material: Granite, quartz, basalt, pebble, limestone, dolomite, etc.

Working Principle of VSI6X Series Vertical Crusher

VSI6X Series Vertical Crusher (also known as “Sand Making Machine”) has two feed modes – “feed at center” and “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Next, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Then, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Next, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening.

Specifications – Technical Data