F5X Vibrating Feeder

F5X Vibrating Feeder Introduction

F5X Vibrating Feeder is designed for super-heavy operation condition. It has 4.5G of strong vibration intensity and extremely firm chute body structure. With 1600TPH capacity, 1.5m maximum feeding particle size and 25~45 m³ standard capacity of bin, it is able to bear 80 m³ compartment pressure, which adapts to heavy compartment pressure, high load and heavy impact and other similar poor conditions during the primary feeding operation.

Input Size: 0-1500mm
Capacity: 500-1600TPH
Material: Granite, marble, basalt, limestone, quartz, pebble, copper ore, iron ore and so on

Working Principle of F5X Vibrating Feeder

F5X Vibrating Feeder uses a motor to drive the eccentric shaft inside the vibrator. The shaft is connected by gears with another shaft juxtaposed to each other. When these two shafts rotate, there is the exciting force. The shaft is arranged in such a way that the resulting stroke slowly pushes materials from the feed end to the discharge end. At the same time, materials are sieved to make the particles more uniform. Typically, a bar screen is equipped at the discharge end of the F5X Vibrating Feeder. Through it, materials whose sizes are smaller than the spacing between two bars are screened out and the larger-sized materials are conveyed into the crusher.

Specifications – Technical Data

Notice:
1. Any change of European Type Jaw Crusher technical data shall not be advised additionally.